OWNSILENT production

Inside Carbon-Ceramic Rotor Production

From raw carbon fibre to a machined C/SiC rotor, step by step in our production.

Raw fibre

Carbon fibre on the creel

Carbon fibre spools are loaded on a creel rack, each batch recorded, before the textile line.

Textile line

Tows become wide sheet

Parallel carbon tows run across the machine's rollers to form broad material.

Sheet preparation

Aligning the carbon sheet

Technicians align the layered sheet on the table before it is cut to specification.

Ring formation

Forming the circular preform

Prepared material becomes ring-shaped blanks; diameter, centre opening and thickness are checked.

Production control

Preforms grouped by size

Stacks of different diameters sit on separate pallets, labelled by size group and stage.

Inspection

Checking the layered edges

Close views show fibre direction and layered edges; measurements decide release.

Machining

Setting up the lathe

The blank is clamped in the lathe and its datum checked before machining starts.

Machining

Drilling the rotor face

A CNC head drills the blank under coolant; hole count and spacing follow the drawing.

Quality control

Checking the machined rotor

Each machined rotor is checked; diameter, thickness, runout and balance are measured.

Your vehicle

Built for your exact vehicle

Send your VIN; we confirm rotor size, hat, offset and parking-brake fit before quoting.

Read the full guide