What bolt pattern and center bore does the Gloss Black Wide Seven-Spoke, Machined Face come in for Bentley?

The recorded Bentley fitment references include: Bentley Continental GT / Bentayga (5x112 or 5x130, 57.1mm to 71.6mm center bore, 20x9.5 to 22x11). These values are a starting point only. The exact vehicle, current wheel/tire package, hub data, offset and clearance still need to be confirmed before an order is approved.

How is wheel fitment confirmed before manufacture?

Send the exact model, model year, VIN where required, current wheel/tire specification and relevant hub or brake information. The final wheel dimensions and interfaces are then recorded in the written quotation before production.

Can the Gloss Black Wide Seven-Spoke, Machined Face be forged in a custom size for my Bentley?

Custom sizing may be reviewed for the Gloss Black Wide Seven-Spoke, Machined Face, but the available range depends on the exact Bentley vehicle, tire plan, hub dimensions, brakes, body clearance and the approved production specification. A single design image does not establish the available sizes.

OWNSILENT REFOS-FW-FIT

Fitment Guide · Bentley

Gloss Black Wide Seven-Spoke, Machined Face fitment specs

Bolt pattern, center bore and size range across 1 Bentley model this design is typically produced for.

Confirm fitment for my vehicle

Full fitment reference

Bolt pattern and size range by Bentley model

This is a reference starting point aggregated across the Bentley range this design is produced for. Your exact hub bore, offset and load rating are confirmed against your VIN on enquiry before any order is placed.

Model	Bolt pattern	Center bore	Size range
Bentley Continental GT / Bentayga	5x112 or 5x130	57.1mm to 71.6mm	20x9.5 to 22x11

How fitment is confirmed

Your exact spec, checked against your VIN

Step 1
Send the exact vehicle details
Provide model, model year, VIN where required and the current wheel/tire specification.
Step 2
Review the dimensional plan
Compare the reference data with the intended tire package, hub, brakes, suspension and body clearance.
Step 3
Written project specification
The quotation records the approved wheel design, dimensions, interface data and project scope before production.

Back to Gloss Black Wide Seven-Spoke, Machined Face

Continue through the OWNSILENT knowledge graph

Product

Bentley Full Chrome Classic Eight-Slot

Fitment

Bentley Full Chrome Classic Eight-Slot Fitment Guide

Product

Bentley Gloss Black Curved Five-Spoke, Machined Face

Fitment

Bentley Gloss Black Curved Five-Spoke, Machined Face Fitment Guide

Product

Bentley Gloss Black Wide Seven-Spoke, Machined Face

Product

Bentley Polished Gunmetal Multi-Spoke Fan

Get In Touch

Confirm fitment for this Bentley forged wheel design

Send your exact vehicle model, year, current wheel size and bolt pattern for technical review and quotation.

Usually replies within one business day · Handled by the OWNSILENT team

Prefer email? Reach us at sales@ownsilent.international

A photographed wheel design is not proof of vehicle fitment.

The center-cap badge identifies the photographed design family. The final wheel specification still depends on the exact vehicle, hub, brakes, tire plan and approved dimensional data.

Vehicle identity

Brand, model, model year, VIN where required and current wheel/tire specification.

Bolt pattern & centre bore

Confirm the actual hub and bolt interface for the exact vehicle before manufacture.

Diameter, width & offset

Review wheel diameter, width, offset, backspacing and front/rear stagger against the intended tire package.

Load requirement

Confirm vehicle and axle loads so the wheel specification is appropriate for the application.

Brake & suspension clearance

Caliper, rotor, suspension and body clearance should be checked before the final specification is approved.

Written wheel specification

Record design, finish, size, hub data, fastener interface, quantity and destination in the quotation.