Vehicle identity
Brand, model, model year, VIN where required and current wheel/tire specification.
Design and visual direction
Wheel size and vehicle interfaces
Bolt pattern, bore and offset
Load, clearance and VIN review
Quotation and production scope
Forged Wheels · Porsche
The largest set in this catalogue — nineteen Porsche-badged variants running from vintage and Fuchs-style five-spokes to satin mesh and a carbon-weave face.

Photographed designs
Every design below was photographed on its own wheel, and the Porsche identification was confirmed by inspecting the physical center-cap badge in that photograph — never assumed from a filename or listing title. Open any design for its full finish description, forged construction detail and Porsche fitment reference.

Satin Gunmetal Multi-Spoke
A tapered multi-spoke design in uniform satin gunmetal, hub carrying the full-color Porsche crest.

Gloss Black Multi-Spoke, Machined Lip
Slender machined spokes over gloss black, edged with a bright polished outer lip.

Gloss Black Five-Spoke, Machined Lip
A wide five-spoke design in gloss black with a machined outer lip, photographed on a display stand.

Gloss Black Five-Spoke, Warehouse Pallet
The same five-spoke gloss black design, photographed resting on a wooden warehouse pallet.

Satin Black Multi-Spoke
A dense multi-spoke face in uniform satin black, shot at full studio resolution.

Matte Black Angular Five-Spoke
Angular five-spoke geometry in matte black, each spoke edged with a thin polished highlight.

Satin Gunmetal Y-Spoke
Slim tapered Y-spokes in satin gunmetal, an open, lightweight-looking pattern.

Gloss Black Classic Five-Spoke
A wide classic five-spoke shape, gloss black with polished spoke faces.

Satin Gunmetal Mesh, Polished Edges
A dense mesh spoke pattern in satin gunmetal, each facet edged in polished silver.

Gloss Black Five-Spoke, Carbon Weave
Five broad spokes finished with a visible carbon-fiber weave texture under a gloss black clear coat.

Gloss Black Multi-Spoke, Machined Face
A dense multi-spoke face machined bright over a gloss black base, hub carrying the full-color Porsche crest.

Gloss Black Wide Five-Spoke, Machined Face
Five wide, sharply faceted spokes machined bright over gloss black, a bolder take than the standard five-spoke.

Gloss Black Classic Five-Spoke, Machined Face
A slender classic five-spoke shape reminiscent of vintage Fuchs wheels, gloss black with a machined face.

Matte Black Multi-Spoke
A dense multi-spoke face in uniform matte black with no machined highlights, a stealthier finish than the rest of the range.

Classic Vintage Five-Spoke, Gloss Black and Polished
A slender vintage five-spoke shape with gloss black spokes and a fully polished lip, hub carrying the full-color Porsche crest.

Matte Gunmetal Y-Spoke
Ten slender Y-shaped spokes in uniform matte gunmetal, a cleaner take than the mesh and angular designs.

Classic Five-Spoke, Polished Deep Lip
A two-tone black-and-silver classic five-spoke face set into a deep, fully polished barrel lip.

White Barrel, Gloss Black Five-Spoke
A striking two-tone design pairing a white barrel with a gloss black five-spoke face, the only white-barreled wheel in this catalogue.

Gunmetal Multi-Spoke, Machined Face
Layered angular spokes machined bright over a gunmetal base, hub carrying the full-color Porsche crest.
Fitment reference
A single Porsche forged wheel design is typically produced across several bolt patterns and size ranges to fit different models and years. The table below is a reference starting point — your exact hub bore, offset and load rating are confirmed against your VIN on enquiry.
| Model | Bolt pattern | Center bore | Size range |
|---|---|---|---|
| Porsche 911 | 5x130 | 71.6mm | 20x8.5 to 21x12 |
| Porsche 718 Cayman / Boxster | 5x130 | 71.56mm to 71.6mm | 19x8.5 to 20x10 |
| Porsche Panamera | 5x130 | 71.56mm to 71.6mm | 20x9.5 to 21x11.5 |
| Porsche Cayenne | 5x130 | 71.56mm to 71.6mm | 21x9.5 to 21x11.5 |
| Porsche Macan | 5x112 | 66.5mm to 66.56mm | 20x9.0 to 21x10 |
| Porsche Taycan | 5x130 | 71.6mm | 21x9.5 to 21x11.5 |
Related pages
Product
Fitment
Product
Fitment
Product
Product
Get In Touch
Send your exact vehicle model, year, current wheel size and bolt pattern for technical review and quotation.
Usually replies within one business day · Handled by the OWNSILENT team
Prefer email? Reach us at sales@ownsilent.international
Fitment before manufacture
The center-cap badge identifies the photographed design family. The final wheel specification still depends on the exact vehicle, hub, brakes, tire plan and approved dimensional data.
Brand, model, model year, VIN where required and current wheel/tire specification.
Confirm the actual hub and bolt interface for the exact vehicle before manufacture.
Review wheel diameter, width, offset, backspacing and front/rear stagger against the intended tire package.
Confirm vehicle and axle loads so the wheel specification is appropriate for the application.
Caliper, rotor, suspension and body clearance should be checked before the final specification is approved.
Record design, finish, size, hub data, fastener interface, quantity and destination in the quotation.